Audio Setup Menu - Yamaha DVX-S301 Manual De Instrucciones

DVD SETUP MENU OPTIONS

■ Audio setup menu

1 In DVD/CD mode, press SET UP.
2 Press to select [AUDIO SETUP PAGE].
/
3 Press ENTER (OK) to confirm.
AUDIO SETUP PAGE
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
Speaker setup
This menu contains setup options for audio output so that
you can set your speakers to reproduce high quality
surround sound. For details, see "Setting speaker
channels" on page 27.
CD upsampling
This feature allows you to convert your music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality.
Note
If you have activated the upsampling function, the
receiver will automatically switch to stereo mode.
1 In [AUDIO SETUP PAGE], press
highlight [CD UPSAMPLING], then press
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of CDs to twice
that of the original.
2 Press to select a setting and press ENTER
/
(OK) to confirm.
Note
If you select "Multi-Channel" mode, the CD
upsampling feature will be cancelled.
38
Night mode
When night mode is activated, high volume output is
softened and low volume output raised to an audible level
(for DVD playback only). This is useful for watching your
favorite action movie without disturbing others at night.
1 In [AUDIO SETUP PAGE], press
highlight [NIGHT MODE], then press
ON
Playback continues at a more even volume and "
" appears in the display panel.
ON
OFF
Playback continues with the full dynamic range of
surround sound, and "
panel.
2 Press
(OK) to confirm.
Note
This function is only available for Dolby Digital.
Lip synchronization
This feature allows you to delay the sound output from the
center speaker in order to synchronize it with the video
image. This may be necessary when using certain LCD
monitors or projectors.
Choices: 0 to 200 ms
1 In [AUDIO SETUP PAGE], press
highlight [LIP SYNC], then press
2 Press
to
/
and 200 ms) and press ENTER (OK) to confirm.
.
" appears in the display
NIGHT OFF
to select a setting and press ENTER
/
to adjust the delay time (between 0 ms
/
to
/
.
NIGHT
to
/
.