Before Operating; To Set The Clock; Language/Weight Selection; Stop/Clear - Viking VMOS501 Manual De Uso Y Cuidado

Before Operating

• Before operating your new microwave oven make sure
you read and understand this Installation/Use and Care
Manual completely.
• Before the microwave oven can be used, follow these
procedures:
1. Plug in the microwave oven. Close the door. The
microwave oven display will show
CLEAR AND PRESS CLOCK
2. Touch the Stop/Clear pad.
3. Set clock .

TO SET THE CLOCK

• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
PROCEDURE
1. Touch Timer/Clock pad
and number 2 pad.
2. Enter the correct time
of day by touching the
numbers in sequence.
Touch Timer/Clock pad
again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show
WELCOME PRESS CLEAR AND PRESS CLOCK
power is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also be
erased. Simply touch Stop/Clear pad and reset the
clock for the correct time of day.
WELCOME PRESS
.
will appear.
:
DISPLAY
ENTER TIME OF
DAY
12:30
will appear in the display.
after the
LANGUAGE/ WEIGHT SELECTION
The microwave oven comes set for English and U.S.
Customary Unit-pounds. To change, touch Help and the
number 4 pad. Continue to touch the number 4 pad until
your choice is selected. Then touch Start/Touch On. See
page 28.

STOP/CLEAR

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the microwave oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
13 13 13 13
E E E E E