Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Machine' ' ' ' s safety equipment
This section describes the machine's safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment! Safety equipment
must be inspected and maintained. See
instructions under the heading Checking,
maintaining and servicing the machine's
safety equipment. If your machine does not
pass all the checks, take it to a service
workshop for repair.
IMPORTANT! All servicing and repair work on the machine
requires special training. This is especially true of the
machine's safety equipment. If your machine fails any of the
checks described below you must contact your service
agent. When you buy any of our products we guarantee the
availability of professional repairs and service. If the retailer
who sells your machine is not a servicing dealer, ask him for
the address of your nearest service agent.
Start button
The start button must be pushed and held to be able to start
the blade rotation. This in order to prevent unintended starting
of the blade rotation.
Checking the start button
•
Turn the knob for blade rotation without pushing and
holding the start button. The blade rotation must not start.
•
Push and hold the start button and turn the knob for blade
rotation. Now the blade rotation shall start.
6 –
English
SAFETY INSTRUCTIONS
Emergency stop and stop button
The hydraulic unit is equipped with an emergency stop and
the remote control with a stop button. These are used to be
able to quickly shut down the hydraulic unit.
Check the emergency stop and stop
button
•
Start blade rotation
•
Push the emergency stop on the hydraulic unit and check
that the blade rotation stops. Check the stop button on the
remote control in the same way.
Publicidad
Capítulos
Tabla de contenido
