Ground Fault Circuit Interrupter (K 3000 Wet) - Husqvarna K 3000 Vac Manual De Instrucciones

Ground fault circuit interrupter
(K 3000 Wet)
Ground fault circuit interrupters are for protection in case
an electrical fault should occur.
The LED indicates that the ground fault circuit interrupter
is on and that the machine can be switched on. If the LED
is not on, push the RESET button (green).
Check the ground fault circuit interrupter
• Connect the machine to the socket. Push the RESET
button (green) and the red LED lights up.
• Start the machine.
• Push the TEST button (blue).
• The ground fault circuit interrupter should trip and the
machine switch off instantly. If not, contact your
dealer.
• Reset with the RESET button (green).
8 – English
MACHINE´S SAFETY EQUIPMENT