Presentation; Stand Ds 150 And Ds 250 - Husqvarna DS 150 Manual De Instrucciones

Stand DS 150 and DS 250

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its'
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you ever lend or sell this machine, make sure that the
borrower or buyer gets the operator's manual, so they will
also know how to properly maintain and use it.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
DS 150
• The stand is for drilling in roofs, walls and floors.
• The base plate is made of aluminium and is therefore very
light weight. It has a integrated vacuum plate.
• The column can be tilted 0-60°.
• The stand is fitted with a drill motor support.
• Feed lever can be used to loosen/tighten drill motor
clamping, to adjust base plate leveling screws and set
desired column tilt.
Accessories
• Gear box
• Wheel set (removable)

PRESENTATION

DS 250
• The stand is for drilling in roofs, walls and floors.
• The base plate is made of aluminium and is therefore very
light weight. It has a integrated vacuum plate.
• The column can be tilted 0-60°.
• The drill stand is equipped with a quick connection plate
for the drillmotor.
• The wheel kit is dismountable.
• The feeder housing's transmission is adjustable. The
higher gives 2.25:1 and the lower, 1:1.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
– 7
English