Troubleshooting - Bosch MUM 6N10 UC Manual De Instrucciones

TROUBLESHOOTING

Problem
The power unit does not start if you
use the bowl and attachments.
The power unit stops while working. The safety cutout to protect the motor against
The blender does not work.
The blender stops while working.
24
Possible Cause and Remedy
The motor drive cover is not on the high-speed drive.
Put the cover on its place.
overheating has switched off the power unit.
Turn the power unit to the "off" position "0/off"
and unplug.
Allow it to cool down for 15 minutes.
The blender cover is not closed completely.
Close the cover completely.
The blade has become blocked by the contents.
Turn the power unit to the "off" position "0/off"
and unplug.
Remove the blender and pour the content into
a suitable container.
The blender jar or the blender cover is not attached.
Turn the blender jar /blender cover
counterclockwise until it is firmly seated.