Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna WCV 180 Manual De Instrucciones

Symbols on the mac hine:
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
En vironmental marking. Symbols
on the product or its packaging indicate
that this product cannot be handled as
domestic waste. It must instead be
submitted to an appropriate recycling
station for the recovery of electrical and
electronic equipment.
By ensuring that this product is taken
care of correctly, you can help to counteract the potential
negative impact on the environment and people that can
otherwise result through the incorrect waste management
of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
2 – English
KEY T O SYMBOLS
Symbols in the operator' s
manual:
Inspection and/or maintenance
should be carried out with the motor
switched off and the plug
disconnected.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.