Blades; General; Water Cooling; Diamond Blades For Different Materials - Husqvarna FS400 LV Manual De Instrucciones

General

• Diamond blades consist of a steel core provided with
segments that contain industrial diamonds.
• Always use a sharp diamond blade.
• The blades should be marked with the same or a higher
speed than that stated on the machine's rating plate.
• Never use blades other than original blades designed for
the machine.

Water cooling

Water cooling must always be used. This cools the blades and
increases their life and prevents dust build-up.
Diamond blades for different
materials
WARNING! Never use a blade for any other
!
materials than that it was intended for.
Husqvarna has a wide range of wet cutting blades for floor
and wall cutting, including blades for everything from fresh to
hardened concrete in different hardness classes as well as a
comprehensive range of asphalt blades. Check with your
Husqvarna dealer to see which blades are best suited for your
usage.

Checking the blade

• Check that the blade and the blade guard are not
damaged or cracked. Replace the blade or the blade
guard if it has been exposed to impact or is cracked. Never
use a damaged or worn blade.
• Check that the right amount of water reaches the blade.

Transport and storage

• Inspect new blades for transport or storage damage.
• The blade should be removed from the machine after use
and stored well. Store the blade dry.
10 –
English

BLADES