Cleaning The Water Collecting Tray; Cleaning The Ice Cube Container; Removing Special Humidity Filter; Led Light - Bosch 800 Serie Instrucciones De Uso

en
Cleaning the water
collecting tray
Spilled water collects in the water
collecting tray.
Remove the strainer to empty and
clean. Wipe out the water collecting
tray with a sponge or absorbent cloth.
Cleaning the ice cube
container
Ice cubes will shrink, have a stale taste
and stick together if they have not
been dispensed for an extended
period of time.
CAUTION
Risk of injury!
A fully filled ice cube container is
very heavy. Use caution when
removing the ice cube container.
1. Press the release button and
remove the ice cube container.
24
2. Empty the ice cube container and
clean with lukewarm water.
3. Thoroughly dry the container and
screw conveyor to prevent new ice
cubes from sticking.
Inserting the ice cube container
4. Push the ice cube container all the
way back onto the supports until it
locks into position.
NOTICE
If the container cannot be pushed all
the way back, twist the screw
conveyor slightly or remove any ice
cubes that may have stuck to the
insertion area.
Removing special
humidity filter
1. Pull out Vita Fresh drawers by
approx. 4 inches (approx. 10 cm).
2. Flip up the glas plate above the Vita
Fresh drawers and take them out.
3. Reach between the openings of the
cover, carefully unhook the front
4 notches and pull out the cover.
4. Remove the special humidity filter.
5. Clean the special humidity filter with
lukewarm water and let it dry.
6. Inser the special humidity filter.
7. Reattach the rear of the cover,
move it down and make sure the
front part engages.
8. Insert the glass plate and close the
Vita Fresh drawers.

LED light

The appliance features a
maintenance−free LED light.
CAUTION
Risk of eye injury from Class 1M
laser light (IEC 60825)!
Do not look directly into the light
with optical instruments.
These lights must be repaired by
customer service or authorized
technicians only.