Installation
STEP 5 Level the dishwasher
Normal
Min. 3/16"
(5 mm)
18
English
DW9900M_DD68-00197B-01_EN.indd 18
You can adjust the height of the
dishwasher to level it. Note that in these
steps, the dishwasher is currently inserted
halfway.
1. Use the level to check if the dishwasher
is level.
2. To adjust the front height, use the
normal sub foot for less than a 13/4"
height, or the tall-kitchen sub foot for
heights between 13/4" and 23/8".
• To lower the height, turn the foot
Tall-kitchen
clockwise.
• To raise the height, turn the foot
counter clockwise.
3. To adjust the rear height, insert the
Torx T20 screwdriver in the bottom
center of the dishwasher.
• To lower the height, turn the
screwdriver clockwise.
• To raise the height, turn the
screwdriver counter clockwise.
4. Leave at least a 3/16" space between the
top of the dishwasher and the bottom
of the countertop.
5. When levelling is complete, check if the
door opens and closes properly.
2017-09-04
4:42:16