Rockwell Automation Allen-Bradley GuardLogix Serie Manual Del Usuario página 142

Apéndice A Indicadores de estado
Mensajes de fallo de E/S, continuación
Código Mensaje
#0807 Time Expectation Multiplier
#0808 Timeout Multiplier
#0809 Invld Max Consumer Number
#080A Invld CPCRC
#080B Time Correction Conn ID Invld
#080C Safety Cfg Signature Mismatch
#080D Safety Netwk Num Not Set OutOfBx
#080E Safety Netwk Number Mismatch
#080F Cfg Operation Not Allowed
#0814 Data Type Mismatch
#FD01 Bad Backplane EEPROM
#FD02 No Error Code
#FD03 Missing Required Connection
#FD04 No CST Master
#FD05 Axis or GRP Not Assigned
#FD06 SERCOS Transition Fault
#FD07 SERCOS Init Ring Fault
#FD08 SERCOS Comm Fault
#FD09 SERCOS Init Node Fault
#FD0A Axis Attribute Reject
#FD1F Safety Data Fault
#FD20 No Safety Task Running
#FD21 Invld Safety Conn Parameter
#FE01 Invalid Connection Type
#FE02 Invalid Update Rate
#FE03 Invalid Input Connection
#FE04 Invalid Input Data Pointer
#FE05 Invalid Input Data Size
#FE06 Invalid Input Force Pointer
#FE07 Invalid Output Connection
142 Publicación de Rockwell Automation 1756-UM020I-ES-P – Agosto 2012
Código Mensaje
#FE08 Invalid Output Data Pointer
#FE09 Invalid Output Data Size
#FE0A Invalid Output Force Pointer
#FE0B Invalid Symbol String
#FE0C Invalid Scheduled P/C Instance
#FE0D Invalid Symbol Instance
#FE0E Module Firmware Updating
#FE0F Invalid Firmware File Revision
#FE10 Firmware File Not Found
#FE11 Firmware File Invalid
#FE12 Automatic Firmware Update Failed
#FE13 Update Failed – Active Connection
#FE14 Searching Firmware File
#FE22 Invalid Connection Type
#FE23 Invalid Unicast Allowed
#FF00 No Connection Instance
#FF01 Path Too Long
#FF04 Invalid State
#FF08 Invalid Path
#FF0B Invalid Config
#FF0E No Connection Allowed
#FE22 Invalid Connection Type
#FE23 Invalid Unicast Allowed
#FF00 No Connection Instance
#FF01 Path Too Long
#FF04 Invalid State
#FF08 Invalid Path
#FF0B Invalid Config
#FF0E No Connection Allowed
–