Channel/Coding - Arthrex AR-8315 Manual Del Operador

Channel/Coding

The IR footswitch has four distinct channel capabilities. This allows up to four different
switches to be used in the same area simultaneously.
The channel is identified in the serial number of the units. See example below.
The channel also appears on a label on top of the units.
XXXXXXXX
Alpha digit designates transmitter or
receiver
In addition to the four channels each manufacturer has its own code encryption. This
assures that different manufacturers with the same channel marking can be used in the
same area simultaneously with no interference. The manufacturer's code is embedded
into the model number as shown below. It also appears on a label on the top of the units.
These three digits denote Arthrex's manufacturer's code.
Unit label:
The first two or three digits denote the manufacturer code; the last digit is the channel.
T001
029
SPL9970214- XXXXXX
290
example
P/N LM0659 Rev. 3
These two digits designate pairing of two
transmitters to one receiver.
Last digit designates
channel
Page 15 of 281