Sleep Function - AudioSonic CL-1484 Manual De Instrucciones

Select alarm weekday mode as follows
1-5 Monday to Friday
1-7 Whole week
6-7 Saturday and Sunday
1-1 One day of the week
action (during data adjustment):
• Press << / YEAR-MONTH-DAY button (3) to adjust data backward.
• Press >> / DST button (4) to adjust data forward.
• Keep depress << / YEAR-MONTH-DAY button (3) or >> / DST button (4) button
for 2 seconds to enable auto backward/forward.
setting aLarm outPut and switching aLarm on/off
a. setting the alarm output
• Set the ALARM RADIO / BUZZER switch (16) to the radio position to select wake
up by radio or to the beep position to select wake up by buzzer.
• Set the DISPLAY LIGHT DIMMER LOW / HIGH / AUTO OFF switch (21) to the AUTO
OFF position (the display will switch off automatically in 15 seconds). When the
alarm sounds, the display will automatically switch on again.
B. switching alarm on/off
• Press ALARM 1 ON / OFF button (1) to toggle on and off alarm output function.
• Press ALARM 2 ON / OFF button (6) to toggle on and off alarm output function.
alarm duration and snooze function
a. alarm duration
• Buzzer alarm or Radio alarm will continue output for 30 minutes if no key's are
pressed, then it will stop automatically and wait for same alarm time on the next day.
B. snooze function
• During alarming, press SNOOZE / SLEEP / NAP button (13) will enable snooze
function, buzzer alarm or radio alarm will stop.
• Snooze interval is 9 minutes
• Snooze will continue unless the ON/OFF button (12) is pressed to end the radio-
or buzzer alarm. The alarm will stop automatically after 30 minutes.
4
Instruction Manual
• Set the DISPLAY LIGHT DIMMER LOW / HIGH / AUTO OFF switch (21) to the AUTO OFF
position (the display will switch off automatically in 15 seconds). When the alarm sounds,
the display will automatically switch on again. Press the SNOOZE / SLEEP / NAP button
(13) to enable the snooze function, stopping the alarm and turning off the display.
change display content
Press the << / YEAR-MONTH-DAY button (3) to switch to display the Year/Month/
Day, after 5 seconds timeout the display will switch back to time automatically.
MONTH Indicator
0 1 0 1

sleep function

When the radio is turned on, press the SNOOZE / SLEEP / NAP button (13) to turn
on the sleep mode. The sleep time will keep flashing for 10 seconds, during that
time press the SNOOZE / SLEEP / NAP button (13) again to change the duration
from 90 to 15 minutes. Press the ON/OFF button (12) to cancel the sleep function.
nap function (countdown timer)
When the radio is turned off, press SNOOZE / SLEEP / NAP button (13) to turn on
NAP mode, the NAP time will keep flashing by 10 seconds, within 10 seconds
and press SNOOZE / SLEEP / NAP button (13) button can change the duration
from 90 min – 10 min. The alarm buzzer will sound for 30 min and then shut off
automatically. To stop the alarm buzzer, press the ON/OFF button (12).
Press the SNOOZE / SLEEP / NAP button (13) button has no effect during alarm
operation. Press the ON/OFF button (12) to cancel the NAP function.
YEAR Indicator
DAY Indicator