Stirrer; Date And Time - Xylem SI Analytics TitroLine 5000 Manual De Instrucciones

143
Fig. 144
Only one printer should be connected for one Titrator because an automatic printer recognition is not
activated. Print PDF is the default setting. If you select "Print PDF", please make sure that a USB stick
is connected to the device.

5.6 Stirrer

Stirrer <ON> means that the magnetic stirrer TM 50 can also be used for stirring if now method has
been executed. This is the standard setting:
Fig. 145
If the stirrer is set to <OFF>, it is only started if a method is executed.

5.7 Date and Time

The factory time setting is Central European Time. This setting may be changed, where necessary:
Fig. 146