Setting The Language Of The Country - Xylem SI Analytics TITRONIC 500 Manual De Instrucciones

Chapter 2 - Unpacking and first Operation
66

2.5 Setting the Language of the Country

The ex-factory default language setting is English. When the piston burette is switched on, the main menu will
appear once the boot sequence is completed:
Fig. 5
Using <SYS/<F7> or <MODE>, followed by <System settings> you navigate to the system settings. The very first
menu is to be used for setting the language of the country:
:
Fig. 6
Use <ENTER>/<OK> to call the menu. Select the national language using the <↑↓> arrow keys, confirm it with
<ENTER>/<OK>:
Fig. 7
The selected language will appear immediately. Pressing the <ESC> key twice will return the user to the main
menu.