Rapid Mode - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

Setting procedure
• Press the
• Press the
OPTION
O
OPTION
• Press the
REAR
• Press the
RAPID
p
q
O
• Press the
REAR
OFF
"REAR" appears in the INFO menu after acti-
ON
vation of the REAR function.
k
If high-speed synchronisation (HSS, see 7.4)
is set on the flash unit and the synchronisati-
on is set to the 2nd curtain, then high-speed
synchronisation (HSS) is deactivated.
The set high-speed synchronisation (HSS) is
deleted by the activation of "REAR".
The "REAR" function set is deleted by the
activation of the high-speed synchronisation
(HSS).
192
D
button as often as it takes
for the selection menu to appear.
OPTION
sensor button on the
touch display.
sensor button on the
touch display and select "REAR".
REAR
sensor button on the touch
display.
ON
sensor button on the touch
display.
The setting is adopted immediately.

11.2 RAPID mode

In flash modes A and ETTL, the recycling
times depend on how much light is needed
for the exposure. If the recycling time is too
long, the RAPID function can be switched on
in the A and ETTL flash modes. The RAPID
function is recommended especially in cases
where fast recycling times are more impor-
tant and maximum flash
output is less important, such as in relatively
small spaces. However, the guide number is
reduced by 1 level, e.g. from a guide number
of 36 (at ISO 100 zoom 35) to guide number
25 (at ISO 100 zoom 35).
Setting procedure
• Press the
for the selection menu to appear.
• Press the
OPTION
touch display.
O
OPTION
• Press the
touch display and select
RAPID
• Press the
SUB-REFL.
touch display.
p
q
• Press the
the touch display and switch the RAPID
O
RAPID
function on or off.
OFF
The setting is adopted immediately.
After activation of the RAPID function, „
ON
appears in the display.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
RAPID
.
RAPID
sensor button on the
ON OFF
or sensor button on
"