Display Description; Keypad Description; Operating The Scale; Simple Counting Mode - Baxtran ARD Manual De Usuario

1.4. DISPLAY DESCRIPTION

1. Zero status indication. Displayed when the scale is at the centre of its zero band.
2. Tare status indication. Displayed when the weight has been tare.
3. Simple counting indication. Displayed when the scale is in simple counting mode.
4. Unit indication. Displayed when the scale is in lb unit.
5. kg indication. Displayed when the scale is in kg unit.

1.5. KEYPAD DESCRIPTION

KEY. In the menu use as "UP" key.
ZERO
When the weigh pan is empty (free of load) and the display is not showing zero, press the "ZERO" key to zero
the scale. (The weight can be zero is only at the 2% of Max. capacity)
KEY. In the menu use as "RIGHT" key.
TARE
The tare function will not operate during the following conditions:
1. When the scale powers on if the weight is negative and after a container is placed on the weigh pan if the
weight is still below zero.
2. The tare value is over the full scale capacity.
UNIT KEY. Use this key to switch between kg and g or lb units.
FUNCTION
PRINT KEY.
Use this key to print data when the printer is connected.

1.6. OPERATING THE SCALE

SIMPLE COUNTING MODE

key once, display shows "PCS 10"
1. Press
2. Press key to choose sample numbers from 10, 20, 50 to 100 pcs, then place the number of samples on the weighing pan.
The number should match the options for parts counting. i.e., 10, 20, 50, 100, 200 pieces.
3. Then press key to start the simple counting mode.
4. Press key to check the unit weight and total weight, display will shows unit weight and shows total weight then back to simple
counting mode.
5. Press key to exit simple counting mode and move back to weighing mode.
KEY. Use this key to choose the functions: Simple counting, Check weighing, Accumulation.
In the menu use as "CONFIRM" key.
USER'S MANUAL ARD EN
33