Using Optional Equipment; Auxiliary Audio Equipment - Sony MEX-BT2600 Manual De Instrucciones

RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" ( ): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A* 1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 16).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off,
– "A.OFF-NO" (
z
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
SUB/REAR* 1
To switch the audio output.
– "SUB-OUT" ( ): to output to a subwoofer.
z
– "REAR-OUT": to output to a power amplifier.
B.OUT (Black Out)
To turn off the illumination automatically for
any source (for example, during CD playback/
radio reception, etc.).
– "B.OUT-ON"* 2 : to turn off the illumination if
no operation is performed for 5 seconds.
– "B.OUT-OFF" (
function.
To bring the light back on, press any button.
DEMO (Demonstration)
To set "DEMO-ON" (
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
– "A.SCRL-ON" (
– "A.SCRL-OFF": to not scroll.
LOCAL (Local Seek Mode)
– "LOCAL-ON" : to only tune into stations with
stronger signals.
– "LOCAL-OFF" (
MONO*
3 (Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
– "MONO-ON" : to hear stereo broadcast in
monaural.
– "MONO-OFF" (
stereo.
LPF* 4 (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" ( ), "LPF125Hz" or "LPF 78Hz."
z
16
), "A.OFF-30S (Seconds),"
): to deactivate the Black Out
z
) or "DEMO-OFF."
z
): to scroll.
z
): to tune normal reception.
z
): to hear stereo broadcast in
z
LOUD (Loudness)
To allow you to listen clearly at low volume
levels.
– "LOUD-ON" : to reinforce bass and treble.
– "LOUD-OFF" ( ): to not reinforce bass and
z
treble.
BTM (page 10)
BT INIT*
1 (page 14)
*1 When the unit is turned off.
*2 When the black out function is activated, the unit
cannot be operated with the card remote
commander.
*3 When FM is received.
*4 When the audio output is set to "SUB."

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
AUX
AUX
Connecting cord*
(not supplied)