Use Of The 12V Dc Outlet - SG Group 3100W Instrucciones De Uso

6.1 Use of the 12V DC outlet.

NOTE: The 12V direct current outlet is only valid for 12V battery charging.
Do not connect 12V electrical or electronic devices to the generator.
Before battery charging check the safety-use instruction of the battery.
The 12V outlet can be use using generator with ECO mode OFF or ON.
The DC 12V and ac 230V outlet can be used at same time.
1 First connect the clamps in the battery terminals.
2 Then connect the charging cable to the generator panel.
3 Start the generator.
CAUTION: Connect the red cable (+) to the red terminal (+) of the battery
and the black cable (-) to the negative (-) of the battery.
CAUTION: In order to avoid sparks in the battery terminals, first connect
the charging cable to the battery terminals and then plug to the generator. Upon
removing, first unplug the generator cable.
NOTE: Do not charge a battery connected to a vehicle. First disconnect
the vehicle's terminals and then connect the charging cable of the generator.
CHARGING CABLE
15