Use Of The 230V De Ac Outlet; Overload And 230V Output Indicator - SG Group 3100W Instrucciones De Uso

6.2 Use of the 230V AC outlet.
NOTE: Check that no devices are plugged into the generator; unplug
everything before starting the engine.
Start up the engine and verify that the 230V current output light indicator is on
(green). Now you can plug your devices.
(GREEN) 230V OUTPUT INDICATOR LIGHT
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output (1800w).
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.

6.3 Overload and 230V output indicator.

In normal use the output indicator (green) is ON.
If the power outputs reach the rated power (about 2600W) the overload
indicator light will turn ON showing we are near to limit of power.
If the power outputs reach the max power the overload indicator light blink and
power output will be OFF in short time.
To reset output power follows the next steps:
1 First unplug all devices connect in generator.
17