SG Group 3100W Instrucciones De Uso página 58

1 Loosen both screws in the maintenance cover and remove the cover
MAINTENANCE COVER COVER SCREWS
2 Loosen the air filter closing flange and open the cover to extract the filtering
cartridge.
CLOSING FLANGE AIR FILTER (SPONGE)
3 Extract the air filter, shake it by giving it soft taps to remove any accumulated
dust and filth. An air compressor may be used.
4 Install the air filter back in the generator, close the filter cap and the
generator's maintenance cover.
NOTE: If compressed air is used, check that the pressure does not exceed
2BAR and do not place the air gun too near to avoid damage to the filter.
24