Publicidad
Idiomas disponibles
Idiomas disponibles
Starting mode:
Connect the charger-starter to the mains (230Vac).
Connect the red clamp to the +12V or +24V position depending on the battery to be started.
Select the starting position as shown in the following image:
The model with rotary selector will automatically start the charging cycle after selecting position 6, while in the
three-switch model the "START" switch must be activated after selecting the "2" and "max" positions of the
corresponding switches.
To optimize the starting process, it is recommended to charge the battery at least 10/15 minutes before attempting to
start the vehicle:
Publicidad
