asalvo CRECE-FIX Manual De Instrucciones página 27

EN
INSTRUCTIONS
NOTE:The ISOFIX attachment points
are located between the surface and
the backrest of the vehicle seat.
Press the ISOFIX button to pull
out the two locking arms from the
base bottom. Pull the locking arm
to and fro until you hear an audible
CLICK which indicates they are fully
engaged. And on both sides of the
locking arms' button turn into green
safety color.
Pull out the top tether, and press
the release button, through the belt
guidance 10, pull the top tether long
enough to hang the latch on the back
of the car seat.
Fixed the latch on the fixed point,
and the position of the fixed point
are shown in the picture(one of the
three positions).Make sure the hook
is tightened up.
2
LNSTALLED IN FORWARD
FACING POSITION WITH ISOFIX
Group 1 (9-18KG)
Put the ISOFIX insert guide into the
two ISOFIX attachment points of
your vehicle.
NOTE: The ISOFIX attachment points
are located between the surface and
the backrest of the vehicle seat.