Coolant Tank; Rear-View Mirrors - Malaguti SPIDER MAX GT500 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3.5 COOLANT TANK

To access the engine coolant tank, open the glove compartment
(A - Fig. 9) located at the centre of the lower fairing and remove the
plastic cover (B - Fig. 9).
Owing to the particular position of the tank, the level of coolant,
with respect to the minimum and maximum level marks, can be
checked through the grid under the upper fairing, on the front side
of the vehicle (as described in § 5.6 of this manual).
1
Use the coolant prescribed in this manual - or one having
identical characteristics - for any topping up.
2
Never unscrew the tank cap (T) when the engine is warm,
so as to avoid burnings.
Do not top up with water, except in emergency situations
and in this case, have the entire contents of the tank
3
replaced by a suitable product as soon as possible.
4
5
6
max
min
T
10
Fig. 9
B
A

3.6 REAR-VIEW MIRRORS

The left and right rear-view mirrors must be fitted to the front body-
work, in particular in their seats, and firmly secured in place.
Adjust the mirror visual angle, while you are sat in riding position
on the vehicle in riding order, by turning the mirror until you obtain
the best conditions of visibility (P - Fig. 10).
The objects that are visible through the mirrors are actually closer
than they seem.
Do not adjust the rear-view mirrors while driving. Always
wait to stop at a traffic light, for example.
P
ENGLISH
Fig. 10

Publicidad

Tabla de contenido
loading

Tabla de contenido