Maintenance Table - Malaguti SPIDER MAX GT500 Manual De Uso

5.2 MAINTENANCE TABLE

CHECKS AND REPLACEMENT
OPERATIONS
Spark plug (condition and electrode gap)
Engine oil and oil filter
Final transmission oil
Valves (clearance)
V-belt
1
Clutch weights
Primary speed variator rollers / Sliding blocks
Tightness of the braking system - injection system pipes
Fuel pump filter
2
Air filter
State of the battery and charge level
Wear: brake pads - discs
Level and density of coolant (replace every 2 years) - Manifold tightness
3
Braking system fluid
Wheel bearings
Chassis linkages (or levers)
Steering system operation and play (lubricate if necessary)
4
Operation and tightness of fork and shock absorbers
Tightness of nuts and bolts
Tightness of side and centre stands - Pivot lubrication
Operation of sidestand switch - Lubrication
5
Tire pressure - tread wear
Final check: tires, pressure, lighting, warning devices, switch functions,
road test
6
Maintenance operations should be performed more frequently if the vehicle is used in rainy weather, in dusty places or on rough terrain.
Due to their simplicity, checks with no asterisk CAN also be carried out by technicians not authorised by MALAGUTI, but
under their direct responsibility.
32
= coupon = check
5000 km
2
1
(3100 mi)
FIRST
10000 km
or 6
1000 km
(6200 mi)
(620mi)
months
or 12 months
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
ENGLISH
= clean = adjust
15000 km
3 4
20000 km
(9300 mi) 25000 km 30000 km 35000 km
(12400 mi)
(15500 mi) (18600mi) (21700mi)
or 18 months
or 24 months
every 2000 km
= replace
5 6
40000 km 45000 km 50000 km
(24800mi) (27900mi) (31000mi)