Malaguti SPIDER MAX GT500 Manual De Uso página 141

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Topping up
Before topping up, check the oil level and in no case allow the
level to rise above the MAX notch.
Topping up to level falling between the MIN and MAX marks means
using about 400 cm
3
of oil.
Never allow the level to rise above the MAX mark! This
may seriously damage the engine, due to excessive in-
ternal pressure.
Every 5000 km, it is recommended to have the engine oil checked
and topped up by an Authorised MALAGUTI Service Centre.
Alarm message (low oil pressure)
The digital instrument board features a control system displaying
a "LOW OIL PRESSURE" message (B - § 3.11.6). The message
appears when the vehicle is turned on to signal that the check
function is working. The message disappears automatically after
a few seconds. It will only reappear during vehicle use if there is
actually a low oil pressure problem.
If the message appears when you are braking, when the
engine is idling or when curving, stop the vehicle, check
the oil level and top up if necessary. If the message re-
mains after topping up, have the vehicle checked by an
Authorised MALAGUTI Service Centre.
Every 5,000 km, the message OIL is displayed on the
digital instrument board. This warning light indicates that
it is time to change the engine oil. This warning light is
displayed on the instrument board until the indicated
operation is carried out by an Authorised MALAGUTI Serv-
ice Centre.
Waste oil is toxic for the environment, therefore we sug-
gest you contact an Authorised MALAGUTI Service Cen-
tre for disposal according to the rules in force.
ENGLISH
1
2
3
4
5
6
35

Publicidad

Tabla de contenido
loading

Tabla de contenido