ASROCK Fatal1ty X99M Killer/3.1 Serie Manual De Instrucciones página 24

Power LED Header
(3-pin PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(S_SATA3_0_1:
see p.1, No. 10)
(S_SATA3_2_3:
see p.1, No. 11)
(SATA3_0_3:
see p.1, No. 12)
(SATA3_1_4:
see p.1, No. 13)
(SATA3_2_5:
see p.1, No. 14)
Serial ATA Express
Connector
(SATAE_1:
see p.1, No. 15)
20
Please connect the chassis
1
power LED to this header
PLED-
PLED+
PLED+
to indicate the system's
power status.
hese ten SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
S_SATA3_3 will not
function. If the Ultra M.2
Socket has been occupied,
the internal S_SATA3_2
will not function. he
SATA3_4, SATA3_5 are
shared with the SATA
Express connector
(SATAE_1).
* RAID is supported on
SATA3_0 ~ SATA3_5
ports only.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATA3_4 and the
SATA3_5.
* he SATA Express
interface is a combination
of SATAE_1, SATA3_4,
and SATA3_5.