ASROCK Fatal1ty X99M Killer/3.1 Serie Manual De Instrucciones página 26

Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.1, No. 23)
(3-pin CHA_FAN2)
(see p.1, No. 9)
(3-pin PWR_FAN1)
(see p.1, No. 31)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 4)
(3-pin CPU_FAN2)
(see p.1, No. 5)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 7)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 2)
22
Please connect fan cables
FAN_SPEED_CONTROL
FAN_SPEED
+12V to the fan connectors and
GND
match the black wire to
1 2 3 4
the ground pin. CHA_
FAN fan speed can be
GND
controlled through UEFI
FAN_VOLTAGE
FAN_SPEED
or F-Stream.
his motherboard pro-
4 3 2 1
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
CPU_FAN_SPEED
FAN_SPEED_CONTROL
3-Pin CPU fan, please
connect it to Pin 1-3.
GND
FAN_VOLTAGE
FAN_SPEED
his motherboard pro-
12 24
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
1 13
his motherboard pro-
8 5
vides an 8-pin ATX 12V
power connector. To use a
4 1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.