Tabla de contenido
Publicidad
Manual
Buttonhole
_1_ Stitch selector:
_] (BH)
Stitch width:
3 to 6.5
Stitch length:
0.25 to 1.0
Needle thread tension:
2 to 6
Presser foot B:
Buttonhole foot
• To sew
If the diameter of the button is more than 1.0" (2.5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
[] Set the stitch at" _]" by turning the stitch selector.
[] Attach the buttonhole foot [ B] .
[] Pull the buttonhole lever downward as far as it will go.
[]Lower
the needle into the garment where the buttonhole
is to start, and lower the foot.
[] Sew the front bartack and left row, then stop.
[] Click the buttonhole lever toward you.
S
S
l
_
WEDTH
_
LENGTH
(_
®
®
i
i
J
J
[] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [] and [] on
page 78.
[]
J
J
84
Publicidad
Tabla de contenido
