The Nyon Operating System; Power Supply Of The On-Board Computer; Initial Operation Of The On-Board Computer - Bosch Nyon BUI275 Instrucciones De Servicio

button is pressed on the on-board computer or the operating
unit of the eBike, the eBike system, and therefore also the
battery, will switch off automatically to save energy.

The Nyon operating system

The Nyon operating system consists of three components:
1. The Nyon on-board computer with operating unit
2. The Bosch eBike Connect smartphone app
3. The online portal at www.eBike‑Connect.com
Many configurations and features can be managed and used
on all components. Some configurations and features can be
accessed or operated only via certain components. Data is
synchronised automatically when a Bluetooth®/Internet con-
nection is available. The following table provides an over-
view of the available features.
Functions of the on-board computer
Functions of the smartphone app
Functions of the online portal
GSM,
3/4G
Login/registration
Changes configurations
Records riding data
Displays riding data in real time
Processes/analyses riding data
Creates user-defined displays
Displays the current location
Navigation
Route planning
Displays the remaining range (circle
around the current location)
Training effect in real time
Overview of journeys
Dashboard statistics
Purchase premium features
A) GPS required
Premium features
The standard features of the "Nyon" operating system can be
expanded via the App Store for Apple iPhones and Google
Play Store for Android devices through the purchase of
"premium features".
In addition to the free Bosch eBike Connect app, there are a
number of fee-based premium features. A detailed list of the
additional apps that are available can be found in the online
operating instructions at
www.Bosch‑eBike.com/nyon‑manual.
Bosch eBike Systems
A
B
A B
www
✔ ✔
✔ ✔
✔
✔
✔
✔
A)
✔ ✔
✔
✔ ✔
✔ ✔
✔
✔
✔ ✔
✔

Power supply of the on-board computer

If the on-board computer is in the holder (4), a sufficiently
charged eBike battery is inserted into the eBike and the
eBike system is switched on, then the on-board computer
battery is powered by the eBike battery.
If the on-board computer is removed from the holder (4),
the power is supplied by the on-board computer battery. If
the on-board computer battery's charge is running low, a
warning message appears on the display.
To charge the on-board computer battery, slide the on-board
computer back onto the holder (4). Note that if you do not
charge the eBike battery straight away, the eBike system will
automatically switch off after 10 minutes of inactivity. If this
happens, the on-board computer battery will also stop char-
ging.
You can also charge the on-board computer via the USB
port. To do this, open the protective cover (9). Use a Micro-
USB cable to connect the USB port (8) on the on-board com-
C
puter to a standard USB charger (not included with the
C
product as standard) or to the USB port of a computer (5 V
charging voltage; max. 500 mA charging current).
If the on-board computer is removed from the holder (4), all
values for the functions are saved and can still be displayed.
If the on-board computer's battery is not recharged, the date
and time will be retained for up to 6 months. When the on-
board computer is switched on again, the date and time are
reset after the current location has been identified by GPS.
✔
Please note: To maximise the lifespan of the on-board com-
✔
puter's battery, it should be recharged every 6 months.

Initial operation of the on-board computer

✔ The Nyon is supplied with a partially charged battery. Before
the first use, the Nyon battery must be fully (see "Power sup-
✔
ply of the on-board computer", page English – 3) charged
✔
via the USB port or via the eBike system.
In order to use all the features of the operating system, you
must also register online.
✔
Registration on the on-board computer
– Switch on the on-board computer using the On/Off button
(5).
– Use the joystick (1) to select your preferred language (se-
✔
lect by pressing the joystick) and follow the instructions.
✔
You have the following options for starting up the Nyon:
– <TEST RIDE>
You can perform a test ride without having to register in
advance or to enter data. After shutting down the on-
board computer, all riding data will be deleted.
– <SET UP> → <OFFLINE>
This is a very short registration process limited to the
Nyon. Offline means in this case that your ride and user
data are only saved locally on the on-board computer.
Follow the instructions and choose one of the suggested
answers. Entered data is retained after the Nyon is shut
down, but will not be synchronised with the online portal
or smartphone app.
English – ​ 3
1 270 020 XBN | (08.05.2018)