Displays And Configurations Of The On-Board Computer; Operating Logic - Bosch Nyon BUI275 Instrucciones De Servicio

Displays and configurations of the
on-board computer
Please note: All screenshots showing the display and text
on the following pages are from the approved software ver-
sion. Due to the fact that the software is updated several
times a year, the display and/or text may change slightly fol-
lowing an update.

Operating logic

You can make changes to the display as you are riding using
the operating unit (10). This way, you can keep both hands
on the handlebars while cycling.
The controls on the on-board computer provide you with the
following options:
– You can switch the on-board computer on or off using the
On/Off button (5).
– Using the Home button ((2) or (12)), you can go to the
operating mode that is set in the <Settings> → <My
Nyon>.
– The bike lights can be switched on or off using the bike
light button (6).
– Use the joystick (1) to navigate to each of the operating
modes. Make a selection by pressing the joystick (1).
Map & Naviga on
Push the joystick (1) to the left to superimpose the main
menu on the active operating mode and to switch to the
main menu (see figure above).
If you push the joystick (1) to the right while in the active op-
erating mode, the configuration options for the current oper-
ating mode are superimposed on the current screen. Move
the joystick to the desired option and select it by pressing
the joystick (1).
Tip: If you are in an active operating mode, you can switch
directly to the next operating mode by pushing the joystick
(1) up or down. If the Nyon is on the eBike, <Ride> mode is
displayed after the Nyon is switched on. If the Nyon is not
mounted on the eBike, <Dashboard> mode is displayed.
Main menu
Symbol Operating mode Function
<Dashboard>
Bosch eBike Systems
This operating mode displays
various pieces of statistical
data, the connection status and
the synchronisation status.
Symbol Operating mode Function
<Ride>
<Map & Naviga-
tion>
<Fitness>
<Settings>
<Dashboard> mode
This operating mode displays various pieces of
statistical data, the connection status and the syn-
chronisation status.
d1
d2
d3
d4
d5
d1 Clock
d2 Charge indicator of the eBike battery
d3 Connection status
d4 Nyon version information
d5 Nyon synchronisation information
d6 Speed/light status indicator (with on-board computer
mounted)/
Charge indicator of the on-board computer's battery
(with on-board computer removed)
d7 Highest number of kilometres travelled in a month
d8 Kilometres travelled in comparison to the previous
month
d9 Total kilometres
d10 Daily kilometres travelled in the last 30 days
The following are synchronised:
– Saved routes and locations
– User-defined screens and riding modes
– User settings
Synchronisation is performed via Wi-Fi or Bluetooth®. If both
connection types are deactivated, you will receive a corres-
ponding fault message.
Ride mode
This operating mode provides current riding
data.
English – ​ 5
This operating mode provides
current riding data.
You can use this operating mode
to download map data based on
Open Street Map (OSM) from
the Internet. You can navigate
using these maps.
You can use this operating mode
to view various fitness-related
information.
This operating mode allows you
to set the basic configurations
of your on-board computer.
d10
1 270 020 XBN | (08.05.2018)
d6
d7
d8
d9