Balluff BMD 1H Serie Manual De Instrucciones página 96

4 Mounting
Mounting socket
14
Fig. 5: Mounting in non-metallic vessel
1 Flange
2 Metal sheet
If this is not possible, use short sockets with small diameter.
Higher sockets or sockets with a bigger diameter can generally be
used. They can, however, increase the upper blocking distance (dead
band). Check if this is relevant for your measurement.
In such cases, always carry out a false signal suppression after
d
Fig. 6: Mounting socket
vessel top.
1
Setup procedure".
d
DN25 ... DN150 ≤ 150 mm ( 5.91")
> DN150 ... DN200 ≤ 100 mm ( 3.94")
2
h