Using Automatic Needle Threader; Utilisation De L'ENfileur De Chas D'AIguille - Singer 8768 Manual De Instrucciones

USING AUTOMATIC NEEDLE THREADER

Be sure to raise the presser foot lifter and raise the needle
1.
about 4" (10 cm) clear.
hold it in place.
Don't pull thread with strong force or thread may
be pulled off from needle hole after threading.
Make sure that the guide doesn't touch fabric, etc.
If the needle has not been threaded correctly, re-
thread from step 1.
NOTE:
For smooth threading, it is recommended that the
machine be set for straight stitch (in center needle
position) when using the automatic needle threader.
Heavy thread cannot be threaded through fine
needle.
Don't lower the threading lever while the machine is
in operation or the threading hook may be broken.
IMPORTANT: If the needle cannot be threaded due to
the nature of thread, manually thread the needle after
hooking thread to the thread guide on the needle bar.
1
Felt disc
Disque de feutre
Gancho del ensartador
20
Hook thread to the thread
2
UTILISATION DE L'ENFILEUR DE CHAS
D'AIGUILLE
1.
10 cm (4 po).
3. Tirez le fil doucement vers le coupeur et reteneur de fil
pour le couper et le retenir.
Ne tirez pas trop fort sur le fil car le fil pourrait
Assurez-vous que le guide ne touche pas au tissu, ect.
le processus depuis l'étape 1.
REMARQUE:
Afin de faciliter l'enfilage, il est recommandé
de régler votre machine au point droit lors de
N'abaissez pas le levier d'enfilage lorsque la
machine est en marche.
B
3
Thread cutter/holder
Cortador de hilo