Dremel 7700 Instrucciones De Funcionamiento página 12

Introduction
The Cordless Rotary Tool is a handful of high-speed
power. It serves as a carver, a grinder, polisher, sander,
cutter, power brush, drill and more.
Your Cordless Rotary Tool has a small, powerful elec tric
motor, is comfort able in the hand, and is made to accept
a large variety of accessories including abrasive wheels,
drill bits, wire brushes, polishers, engraving cutters,
and cutting wheels. Accessories come in a variety of
shapes and permit you to do a num ber of different jobs.
As you be come familiar with the range of accessories
and their uses, you will learn just how versatile your
Cordless Rotary Tool is. You'll see dozens of uses you
hadn't thought of before now.
The real secret of the Cordless Rotary Tool is its speed.
To understand the advantages of its high speed, you
have to know that the standard portable electric drill
Releasing and inserting battery Pack
Remove the battery pack from the tool by squeezing
the two tabs on the battery pack together and slide the
battery pack out of the tool.
Charging the tool
The Model 7700 Cordless Rotary Tool battery pack is
not fully charged. The tool is equipped with a removable
battery pack. Be sure to charge pack prior to initial use.
For best re sults on first charge, charge pack overnight.
To charge the tool:
1. Put the switch in the "OFF" position.
Operation Instructions
runs at speeds up to 2,800 revolutions per minute. The
typical electric drill is a low-speed, high torque tool; the
Cordless Rotary Tool is just the opposite — a high-
speed, low torque tool. The chief difference to the user
is that in the high speed tools, the speed combined with
the acces sory mounted in the collet does the work. You
don't apply pressure to the tool, but simply hold and
guide it. In the low speed tools, you not only guide the
tool, but also apply pres sure to it, as you do, for example,
when drilling a hole.
It is this high speed, along with its compact size and
wide variety of special accessories, that makes your
Cordless Rotary Tool differ ent from other power tools.
The speed enables it to do jobs low speed tools cannot
do, such as en graving glass, etc.
Getting the most out of your Cordless Rotary Tool is a
matter of learning how to let this speed work for you.
2. Squeeze release tabs on both sides of battery pack,
and remove pack from back of tool as shown on page
12.
3. Align exterior shape of battery pack with exterior
shape of charger, squeeze release tabs, insert battery
pack into charger as shown and release pressure on
BATTERY PACK
tabs so it locks in place.
RELEASE TAB
4. Plug charger into the power source. The green L.E.D.
light indicates connection has been made and the
battery pack is charging. The L.E.D. light will blink while
charging. The L.E.D. will turn solid when charging is
complete. Under normal usage the tool normally
requires 3 hours charging time to reach full capacity.
5. When charging is completed, squeeze release tabs on
battery pack and remove pack from charger.
6. Align exterior shape of battery pack with exterior
shape of the hous ing of tool as shown. Squeeze release
tabs, insert battery pack into back of tool, and release
pressure on tabs so it locks in place.
12