Unpacking And Assembly - Sabo 72-12G Manual De Uso

UNPACKING AND ASSEMBLY

3. UNPACKING AND ASSEMBLY
For storage and transport reasons, some components of the machine are not
directly installed in the factory, but have to be assembled after their removal from
the packing. Final assembly is carried out by following these simple instructions.
IMPORTANT
oil or fuel. Before starting up the engine, fill with oil and fuel following the
instructions given in the engine booklet.
UNPACKING
When unpacking the machine, take care to gather all individual parts and fittings,
and do not damage the cutting deck when taking the machine off the base pal-
let.
The standard packing contents:
– the machine;
– the battery;
– steering wheel;
– seat;
– grass-catcher components;
– an envelope containing the instruction manual, documents and the nuts and
bolts with two starter keys, a pin for blocking the steering wheel and a spare
10 Ampere fuse.
ASSEMBLY AND CONNECTING THE
BATTERY
Remove both the rear column cover (1)
fastened with two screws (2) and the
front column cover (3) fastened with
another two screws (4).
For transport reasons the machine is supplied without engine
2
1
4
ENG 9
3
4