GENERGY SILENT Serie Instrucciones De Uso página 67

3 Turn the start up key on the panel to "ON".
4 Open the front access door as shown in the figure below. Pull the startup handle
slowly and until the end to calculate the maximum length of the rope (and do not
exceed it later when pulling vigorously), then allow the rope to coil back.
Pull softly again until you notice slight resistance, now allow the rope to coil back
and pull vigorously to start up the engine. If you were unable to start up in the first
try, repeat the operation.
NOTE: If you reach the end of the rope length abruptly you could damage the
handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from
hitting the machine. Move your hand along with the handle until it has coiled back
completely.
NOTE: Never pull the rope again if the generator is already running and
turning.
64