Troubleshooting - Bissell READYCLEAN 47B2 SERIE Guia Del Usuario

Troubleshooting

problem possible causes
solution tank empty
lint screen on solution tank cap
clogged
Reduced
spray Nozzle Clogged
spray oR
no spray
Upper handle is not in the upright
and locked position
Collection tank not aligned/
secured
Collection tank full
Deep cleaner Removable nozzle installed
not picking
improperly
up cleaning
solution
Removable nozzle full of debris
Red lint screen under collection
tank clogged
please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Refill tank with water and formula
soak solution tank cap in warm water
and then rinse under running water
Clean spray nozzle by rinsing
under water
Rotate the retractable handle lock,
pull handle up and return the handle
lock to the locked position.
Check tank alignment and secure
with side latches
empty tank
Unplug unit. Align two "hooks" into
bottom first, then snap into place on
top
Unplug unit. Remove nozzle and
rinse under running water
Remove debris from lint screen
www.bissell.com 800.237.7691
9