Date And Time Adjustment ( ); Units Of Measure Setting - Cressi Archimede II Manual De Instrucciones

NOTE: When switched on (ON), the maximum depth
alarm works in both
Related topics:
• 2.3.1. – parameters setting.
• 2.4. – program (depthometer/timer)
2.5.2. - Date and time adjustment (
To adjust date and hour, depress button B (Mode) until the
icon ( ) appears on the UFDS display, with the seconds'
display flashing (picture 9).
By depressing button A (
9). 1) second, 2) minutes, 3) hour, 4) 12/24h and, in sequen-
ce, year, month and day. By depressing button A (
function to be modified will flash and may be varied by
depressing button C ( ).
To revert back to the normal display (picture 1), depress but-
ton B (Mode) for several seconds.
NOTE: Always check the hour and date in order to get
correct entries in your computer's logbook.
Related topics:
• 4.1.2. – Logbook.
• 3.6. – program (depthometer/timer)

2.5.3. - Units of measure setting.

Archimedes II computer can make computations by metric
units (depth in meters and temperature in °C), or in feet and
(depth in feet and temperature in °F).
To change the units of measure to be used, depress button
and computing programs.
).
) view the regulation of (picture
i
B (Mode) to go to the first menu of (
setting (picture 3). Then depress buttons A+C in sequence
and keep them pressed together for about 5 seconds. An
alarm and the new set unit of measure will appear on the dis-
play.
By depressing button B (Mode) for several seconds, you will
return to the normal display (picture 1).
), the
i
171
or ) program