Max REBAR-TIER RB401T-E Manual De Instrucciones E Instrucciones De Seguridad página 19

REMOVE REEL OF TIEWIRE
When you have finished the Tiewire, remove the
reel from the tool.
STORE THE TOOL
When you have finished tying work or when the
tool will not be used for a while, set the Main
switch (Fig.1.e) at "OFF" and remove the Battery
pack (Fig.1.5). The tool and accessories should
be stored in a well-ventilated dry place where the
temperature will not exceed 104°F (40°C).
The Battery pack with the Pack cap (Fig.2.k) to
prevent short circuits should be stored in a well-
ventilated dry place where the temperature will
not exceed 86°F (30°C).
MAINTENANCE
Do not blow air around Feeding gears (Fig.1.h)
and Hooks (Fig.1.f).
Dust can enter the inside of a machine and
cause malfunctions.
When three short beeps are repeated, dust the
sides of sensors (Fig.38.p) and the top of
lenses (Fig.38.q) with a soft cloth or cotton bud
gently.
19