Troubleshooting Guide - Black+Decker BEMW472BH Manual De Instrucciones

Troubleshooting Guide

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.blackanddecker.com for a list of service centers, or call the
BLACK+DECKER Customer Care Center at 1-800-544-6986.
PROBlEM
• Mower will not start.
• Mower functions
intermittenly.
• Mower leaves ragged
finish or motor labors.
POssiBlE CAUsE
• Cord is not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Grass too long.
• Thermal cut out activated.
• Thermal cut out activated.
• Height of cut too low.
• Cutting blade is dull.
• Underside of mower is clogged.
• Blade is installed upside-down.
POssiBlE sOlUTiOn
• Plug mower into a working outlet.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced by an authorized BLACK+DECKER
service center.
• Reset circuit breaker. (If the product
repeatedly causes the circuit breaker trip,
discontinue use immediately and have it
serviced by an authorized BLACK+DECKER
service center.
• Have cord or switch replaced at an
authorized BLACK+DECKER service center.
• Increase the height of cut and move
mower to shorter grass to start.
• Allow motor to cool and increase height
of cut.
• Allow motor to cool and increase height
of cut.
• Increase height of cut.
• Replace or sharpen the blade.
• Unplug mower. Check underneath the
mower and clear out debris as necesary.
(Always wear heavy duty gloves)
• Install blade correctly.
English
11