How To Assemble - Omega MMC500C Manual Del Usuario

INSTRUCTIONS: How to Assemble
1
2
3
4
5
6
7
Place the pulp receptacle bin behind the
motor base housing.
Place the bowl on the base housing with
the spout facing the front of the unit.
Place bowl ring on top of the bowl with
the groove facing upwards. Align the
chute over the pulp receptacle bin.
Place the juicing screen/blade assembly
inside the bowl, and press lightly with
hands to make certain it rests flat and firm.
Place cover on bowl with ejection chute
opening to the rear. The tab on the front
of the cover should rest in the groove on
the pulp chute. The pulp chute should rest
inside of the pulp receptacle bin.
Place tabs of latch arms over cover and
secure by pressing down on the bottom of
each latch arm.
Insert pusher into the feed chute, with the
arrow facing backwards.
5