cecotec CONGA 1490 Manual De Instrucciones página 40

ENGLISH
Direction button
During Standby mode or Automatic cleaning:
Press the upwards button to move the robot forward.
Press the downwards button to move the robot backwards.
Press the left direction button for the robot to turn left.
Press the right button to move the robot right.
Time and schedule settings
The robot is provided with a schedule function in order to provide a maximum-efficiency
cleaning. The time settings and the cleaning schedules must be carried out from the remote
control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note: Make sure the robot is activated and that the light indicator is lighted before scheduling
any cleaning or setting time.
Setting day
Use the direction buttons to select the day from Monday to Sunday, the selected day of the
week will flash.
Press the On/off button to confirm the day of the week and the selected day will turn steady.
Cleaning modes
Fig. 12
The robot offers different cleaning modes which adapt to different cleaning needs.
Auto cleaning mode: From the Standby mode, press the On/off button on the robot for the
robot to start cleaning automatically. It will carry out a cleaning cycle in Gyro mode, Edge
mode and then will finish off in Random mode. It is the most commonly used cleaning mode
and it is used to clean the 100 % of the house's surface. The robot vacuums the floor's dust
automatically, in and organized and efficient way, as it features memory and gyroscopic
navigation. Moreover, it changes direction when it finds obstacles through out its route and
it returns to the charging base in a smart and direct way once the cleaning is over. It includes
TotalCleanfunction, therefore the robot cleans the whole surface, returning to the charging
base if necessary until it finishes it.
Once it has completed cleaning, the robot will operate in Random mode until it runs out of
battery.
Edge mode
The robot will clean along the edges and will return to the charging base through its smart
technology once it has finished. If the robot has not started cleaning from the charging base, it
will return to the starting point.
Area mode
The robot will clean in Gyro mode in 2*2 m zones.
40