System Settings; Performing System Settings; Setting The Calibration And Adjustment; Switching The Isocal Function On Or Off - Sartorius Entris II Advanced Line BCA Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 161
7

System Settings

7 . 1

Performing System Settings

Default settings can be adjusted for the device and the
applications in order to align with the ambient
conditions and individual operating requirements . You
can change the settings at any time .
The following settings are necessary to operate the
device together with connected components:
− Set up the communication of the connected devices
− Set up additional components
When using the device for the first time and after
resetting the device settings, the installation assistant
starts . This assists with the following settings:
− Set the menu language
− Set the date and time
Procedure
Press the [Main menu] button .
t
To adjust settings: Open the desired menu .
t
Select and confirm the desired parameter
t
(parameters, see Chapter "4 . 1 0 "Main Menu" Menu
Structure", page 17) .
Exit the menu .
t
7 .2
Setting the Calibration and
Adjustment
7 .2 . 1
Switching the isoCAL Function On or
Off (Only Model I- x)
When using the isoCAL function, the device performs
an automatic time- and temperature-dependent
internal calibration and adjustment .
Depending on the device model, other temperature
ranges may apply for ensuring metrological data when
the isoCAL function is switched off (see Chapter "14 . 1
Ambient Conditions", page 47) .
If this relates to a conformity-assessed
device in legal metrology: In some cases it is
not possible to switch off the isoCAL
function .
Procedure
Open the main menu .
t
Open the "Settings" / "Cal .-/adj . settings" / "isoCAL"
t
menu .
To set the automatic start of the isoCAL function:
t
Select "Automatic" setting .
To set the manual start of the isoCAL function: Select
t
the "Info, manual start" setting .
To switch off the isoCAL function: Select the "OFF"
t
setting .
7 .3

Editing User Management

7 .3 . 1

Setting and Changing Admin Password

Requirements
The "Administrator" is logged into the device .
Procedure
Open the "Settings" / "User management" / "Set
t
admin password" menu .
Press the [ . . .] button .
t
The input screen for the admin password is displayed .
y
Enter the desired password in the input field and
t
confirm with the [Confirm] button .
The input screen for the user password is displayed
y
again .
Enter the password in the input field a second time
t
and confirm with the [Confirm] button .
Press the [Confirm] button .
t
Entris
II Advanced Line Operating Instructions
®
System Settings
37

Publicidad

Tabla de contenido
loading

Tabla de contenido