Check Driver Information; Check Receive And Transmit Statistical Information; Windows Vista - Multilaser RE025 Manual Del Usuario

3.1.3.1. Check Driver Information

Click the Adapter Information button in the screen above, you will see the adapter information, including general information about the wireless network adap-
ter and the Network Driver Interface Specification (NDIS) driver. Access the adapter information from the Diagnostics tab.
• Card Name - The name of the wireless network adapter.
• MAC Address - The MAC address of the wireless network adapter.
• Driver - The driver name and path of the wireless network adapter driver.
• Driver Version - The version of the wireless network adapter driver.
• Driver Date - The creation date of the wireless network adapter driver.
• Client Name - The name of the client computer.

3.1.3.2. Check Receive and Transmit Statistical Information

The Advanced Statistics show receiving and transmitting statistical information about the following receiving and transmitting diagnostics for frames received
by or transmitted to the wireless network adapter.
36

3.2 Windows Vista

Wireless Client Utility (AWCU) is not available for Windows Vista. So after the Adapter's driver has been installed, we have to
use Windows WLAN Autoconfig to establish a connection. Please follow the steps below.
a. Right-click the icon
your system tray and then select "Connect to a network".
3 14
www.multilaser.com.br
at the bottom of your screen in
F
igura
F 3 13
igura
b. This page will then display and you will see the available
wireless network list. Select the SSID of your Access Point,
take test for example. Click Connect.
F 3 15
igura