Pin Method; Enter A Pin Into Your Ap Device; Enter The Pin From Your Ap Device - Multilaser RE025 Manual Del Usuario

4.2 PIN method

There are two ways to configure the WPS by PIN method.

1) Enter a PIN into your AP device.

2) Enter the PIN from your AP device.

Following are the detailed configuration procedure of each way.
4.2.1 Enter a PIN into your AP device
1. Double click the icon
Utility and then you can see the welcome screen shown as
Figure 4.5 Click Next to continue. Figure 4.8 will appear. Select
the second option, and you will see the PIN value of the adap-
ter which is randomly generated. Click Next.
40
4.2.2 Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 4.5. Click Next to continue. Then Figure 4.10 will appear. Select the third option
and enter the PIN value which is labeled on the bottom of the Router. Click Next.
www.multilaser.com.br
on the desktop to open the WPS
F
igura
F
igura
2. Open the Router's Web-based Utility and click WPS link on
the left of the main menu. Then Figure 4.3 will appear. Click
Add device, then you can see Figure 4.8 Select Enter the new
device's PIN and enter the PIN value of the adapter shown in
Figure 4.8, click Connect.
3. When Figure 4.7 appears, the WPS configuration is com-
plete.
4 8
2. When Figure 4 7 appears, the WPS configuration is com-
plete.
Note:
If you generate a new PIN code for your Router, please enter
the new one instead.
4 10
F 4 9
igura