Multilaser RE025 Manual Del Usuario página 37

3. Enter the passphrase, take 1234567890 for example. And
then click Connect.
5. Click Close to finish
3.3 Windows 7
Wireless Client Utility (AWCU) is not available for Windows 7. So after the Adapter's driver has been installed, we have to use
Windows WLAN Autoconfig to establish a connection. Please follow the steps below:
1. Right-click the icon at the bottom of your screen in
your system tray and then you will see the available wire-
less network list. Select the SSID of your Access Point, take
E17C9D for example. Click Connect
F
igura
F 3 16
igura
F 3 18
igura
3 19
4. If the key entered is correct, you will successfully connect
to the network.
2. If your wireless network is secured, you will be required
to enter the security key as shown in Figure 3 20. Enter the
passphrase, take 1234567890 for example. And then click OK.
adaptador wireless N
F 3 17
igura
F 3 20
igura
37