Getting Ready To Sew; Connecting The Machine To The Power Supply; Controlling Sewing Speed - Janome Cover Pro 900cp Manual De Instrucciones

Janome 900cp Instruction Manual
q
www.toews.com
t
e
w
r
q
y

GETTING READY TO SEW

Connecting the Machine to the Power
Supply
z Turn off the power switch, and connect the
machine plug to the machine socket.
x Connect the power supply plug to your power
supply.
c Turn on the power switch.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Power supply
y Foot control

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the ma-
chine runs.
Step on the foot control with the presser foot lifter up, and
practice controlling the speed.
q Foot control
For Your Safety:
* While the machine is in operation, always keep your
eyes on the sewing area, and do not touch any moving
parts such as the thread take-up lever, loopers,
handwheel or needles.
* Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
Do not place anything on the foot control, except when the
machine is in use.
Operating Instructions:
• The symbol "O" of a switch indicates the "off" position of
a switch.
• For appliances with a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
• Foot controller Model YC-482-J is for use with sewing
machine model 900CP.
6
900cp Owners Manual/ User Guide