IB_KH1106_E23715_GB
– five times to defrost vegetables („dEF5" ap-
pears in the LED display),
– six times to defrost cooked meats („dEF6"
appears in the LED display).
The red symbols for microwave operation
and defrosting
display.
2.
Using the dial
a
food to be defrosted in grams (the LED display
shows
). You can set the following weight
ranges for the various foods:
Meat:
100 to 2300 g
Poultry:
100 to 4000 g
Fish:
100 to 1000 g
Pizza:
150 to 900 g
Vegetables: 100 to 600 g
Sausage:
100 to 500 g
3.
To start the defrosting process by weight, plea-
se press button
s
LED display the symbols for microwave operati-
on
and defrosting flash
ted time counts backwards.
Note: With some foods, such as meat, poultry,
fish, vegetables and sausage, it is necessary
to turn the food after a while. The acoustic
signal sounds twice and „turn" appears on
the display, to remind you to turn the food.
1.
Press „Cancel/Stop" button
the door and turn the food.
2.
Close the door and press button
„Start/quick start".
The defrosting process is continued.
Note: If you wish to carry on without turning,
wait for a while after the acoustic signal. The
microwave automatically continues its program.
We recommend that you turn the food. This en-
sures even defrosting.
15.07.2008
14:19 Uhr
also appear on the LED
to enter the weight of the
„Start/ quick start". In the
. The calcula-
i
then open
s
Seite 79
Defrosting by time
1.
Press button
f
„Defrosting". The red symbols
for microwave operation
also appear on the LED display.
2.
Turn the dial
a
to set the defrosting time:
The maximum possible defrosting time is 95 mi-
nutes.
3.
Press button
s
„Start/quick start", to start
the defrosting process. In the LED display the
symbols of microwave operation
defrosting flash
counts backwards
Query functions
Query the time during operation
During the cooking process, press button
The time appears on the LED display for 2– 3 se-
conds.
Query the power level operation
During the cooking process, press button
wave". The activated power level appears on the
display for 2– 3 seconds.
Child protection system
Activate this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the appliance.
The symbol for the child protection system
pears on the LED display, and the appliance cannot
be put into operation as long as this function is acti-
ve.
Setting the child protection system
Keep button
i
„Delete/Stop" for 3 seconds. At first
an acoustic signal sounds, then the symbol for the
child protection system
display.
Deactivating the child protection system
Keep button
„Delete/Stop" pressed again for
i
3 seconds, until an acoustic signal sounds and the
symbol for the child protection system
out.
- 79 -
and defrosting
and
. The calculated time
„Clock".
d
„Micro-
o
ap-
appears on the LED
goes