Beep Sound; Display Window - Panasonic NN-C69KSM Manual De Instrucciones

Control panel
„ Beep sound
When a button is pressed correctly a
beep will be heard. If a button is
pressed and no beep is heard, the unit
has not or cannot accept the
instruction. The oven will beep twice
between programmed stages and at
the point to stirring or turning the food
in the AUTO PROGRAMME. After the
completion of the preheating on
CONVECTION or COMBINATION
mode, three beeps sound. At the end
of any complete programme, the oven
will beep 5 times and "End" will be
displayed.

Display window

CONVECTION mode
High wire rack
• Start indicator flashes when the setting is completed and preheating or cooking is
ready to start. Press Start to start preheating or cooking.
• Confirm indicator flashes when a setting needs to be confirmed. Press dial to
confirm the setting and proceed to next setting.
• High wire rack, Low wire rack, and Grill pan indicator indicates which accessory to
use for each AUTO PROGRAMME.
NN-C69KSM_EPG.indb 16
MICROWAVE mode
GRILL mode
Low wire rack
Grill pan
16
„ Note
If Start is not pressed for 6 minutes
after cooking programme setting, the
oven will automatically cancel the
cooking programme. The display will
revert back to clock or colon.
Defrost mode
AUTO PROGRAMME
Number/character
Start
Confirm
EN
2019/07/29 18:14:46