Beep Sound; Control Panel - Panasonic NN-GD359W Instrucciones De Funcionamiento

Ocultar thumbs Ver también para NN-GD359W:
Tabla de contenido

Publicidad

NN-GD359W / NN-GD369M / NN-GD379S*
(1)
(2)
(6)
(9)
(11)

Beep sound:

When a pad is touched correctly a beep will be heard. If a pad is touched and no beep is heard,
the unit has not or cannot accept the instruction. At the end of any complete program, the oven
will beep 5 times.
N.B:
If an operation is set and start pad is not pressed, after 6 minutes, the oven will automatically
cancel the operation. The display will revert back to clock mode.
En-6

Control panel

(3)
(4)
(5)
(7)
(8)
(10)
(12)
(1) Display window
(2) Auto weight Microwave programs
(3) Auto weight Combination
programs
(4) Auto weight Turbo Defrost
programs
(5) Time/weight Dial
(6) Microwave power Pad
(7) Grill Pad
(8) Combination Pad
(9) Delay/Stand Pad
(10) Clock Pad
(11) Stop/Cancel Pad:
Before cooking:
One press clears your instructions.
During cooking:
One press temporarily stops the
cooking program. Another press
cancels all your instructions and the
time of day will appear in the display.
(12) Start Pad
The design of your control panel may vary
*
from the panel displayed (depending on
colour), but the words on the pads will be
the same.
This oven is equipped with an energy
saving function.
Please Note:
1. When in stand-by mode the brightness
of the display will be reduced.
2. The oven will enter stand-by mode,
when first plugged in and immediately
after the last operation has completed.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nn-gd369mNn-gd379s

Tabla de contenido